Pneumatic Conveying System
Roll Compactor Loading System Application
The system is placed above the hopper of the compactor machine. System includes 01 no. conveying hopper, control panel and vacuum source.
The material will be sucked from the bottom of IPC and load the filling machine hopper through conveying system. After compaction same system can also used to transfer material from IPC (Compressed Material) and again load the hopper.
- Convey receiver volume: 15 Liters.
- Pneumatically actuated butterfly value for material discharge.
- Filter made from non-woven fabric & is washable.
- Contact parts of SS 316 & Non-contact parts SS 304.
- In-built safety features as thermal overload, positive earthing, actual time indicator for set cycles, vacuum safety valve.
- Vacuum source used is dry type geared rotary blower housed in a cast iron body.
- Vacuum Source having silencer at suction & discharge to reduce the noise level.
- Vacuum source equipped with suction air filter to prevent foreign particles.
- Approx. O/P: 100 to 300 kg/hr (Depending upon material & its characteristics, consideration in 0.5 B.D material).